Reference Markers
Adhesive Targets for Precision 3D Measurement
3D scanners and hand-held laser scanners use reference markers, or adhesive targets, to help increase the accuracy of each scan orientation. The need for targets depends on the project and part. Using reference markers is especially helpful for parts that need to be fully digitized by flipping the part upside down. ZEISS technology uses minimal targets, and these reference markers are precisely sized and printed. Customers who prefer not placing reference markers onto a part's surface use premeasured Reference Frames. These frames have targets on the frame, and the part is positioned inside. The Reference Frame is not part-specific, so it can be used with many different parts that are relatively the same size. In addition, the cost of building a Reference Frame is inexpensive.
Most reference markers come with three adhesive selection options:
- Low
- Medium
- High (temperature stable up to 120°C)
|
|
|
 |
| 0.4 mm, uncoded, white uncoded white point markers inner diameter 0.4 mm / outer diameter 1.9 mm round, on adhesive foil in a box 3000 single point markers per box TU-35230 = medium TU-35231 = high |
0.8 mm, uncoded, white uncoded white point markers inner diameter 0.8 mm / outer diameter 2.5 mm round, on adhesive foil in a box 3000 single point markers per box TU-35233 = medium TU-35234= high |
1.5 mm, uncoded, white uncoded white point markers inner diameter 1.5 mm / outer diameter 3.5 mm round, on adhesive foil in a box 3000 single point markers per box TU-35235 = low TU-35236 = medium TU-35239= high |
 |
 |
 |
| 3.0 mm, uncoded, white uncoded white point markers inner diameter 3.0 mm / outer diameter 7.0 mm round, on adhesive foil as tear-off pad 3000 single point markers per pad TU-35240= low TU-35241 = medium TU-35242= high |
5.0 mm, uncoded, white uncoded white point markers inner diameter 5.0 mm / outer diameter 10.0 mm round, on adhesive foil as tear-off pad 3000 single point markers per pad TU-35243= low TU-35244= medium TU-35245= high |
8.0 mm, uncoded, white uncoded white point markers inner diameter 8.0 mm / outer diameter 16.0 mm round, on adhesive foil as tear-off pad 1500 single point markers per pad TU-35246= low TU-35247= medium TU-35248= high |
 |
 |
 |
| 12.0 mm, uncoded, white uncoded white point markers inner diameter 12.0 mm / outer diameter 24.0 mm round, on roll 5000 single point markers per pad TU-12060= easy removable |
18.0 mm, uncoded, white uncoded white point markers inner diameter 18.0 mm / outer diameter 36.0 mm round, on adhesive foil 1000 single point markers per pad TU-14913= easy removable |
25.0 mm, uncoded, white uncoded white point markers inner diameter 25.0 mm / outer diameter 50.0 mm round, on adhesive foil 1000 single point markers per pad TU-14913= permanent adhesive |
UPDATE TO ONLINE PURCHASES OF THIS PRODUCT:
We're excited to share that these items are now available for online purchase in the ZEISS Metrology Shop! Read more about this important update below.
To place an order by phone, please call the ZEISS Aftermarket team at (800) 327-9735. For questions, please contact .
IMPORTANT UPDATE
To continue to purchase these items online, you must have a ZEISS Metrology Shop account and a ZEISS ID. This enables a streamlined and personalized shopping experience. Click here to register for the ZEISS Metrology Shop now.
After you create your account, watch for an email confirming your registration is under review, and later, a second email stating that it is approved. Then, your registration is complete, and you can go shopping with your ZEISS ID.
Click here to read more about this update.
